Monroy

Monroy

 
Productos
Scroller
M15000 Winch 12V 90´ Roller
M15000 Winch 12V 90´ Roller


XD9000 Winch 12V 125´ Roller
XD9000 Winch 12V 125´ Roller


M12000 Winch 12V 125´ Roller
M12000 Winch 12V 125´ Roller


TABOR 12K, 12V, 100´ Roller
TABOR 12K, 12V, 100´ Roller


XDC9500 12v 125' Roller
XDC9500 12v 125' Roller


M8274-50 Winch 12V 150´ Roller
M8274-50 Winch 12V 150´ Roller


XP 9500 Winch 12V 125´ Roller
XP 9500 Winch 12V 125´ Roller


Supertop
Supertop


Tire Covers
Tire Covers


M6000 Winch 12V 80´ Roller
M6000 Winch 12V 80´ Roller


 
PDF
WARN arrow Winches arrow Premium Series arrow XP 9500 Winch 12V 125´ Roller



XP 9500 Winch 12V 125´ Roller





9.5xp SELF-RECOVERY WINCH
The fast, powerful WARN 9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions in the world. With 9,500 lbs. of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5xp delivers extreme performance that eats up the competition-even in competition.

The 9.5xp winch features an all new, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. A high gloss, chip resistant powder coat finish over chromate coated alloys affords superior corrosion resistance.

9.5XP SPECS/PART NUMBERS
Part Number: PN 68500 (12V DC)
Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
Motor: 12V 6 hp, High Output Parallel Series Wound
Remote Control: Remote switch, 12' (3.7m) lead, S2 elements, integrated flashlight
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Wire Rope: 100', 5/16" diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Chromate with high-gloss dark gray powder coat
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 87 lbs. (39.5 kgs.)

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 38(11.6) 70 amps 1/9500(4313)
2000(910) 16.8(5.1) 175 amps 2/8650(4927)
4000(1818) 12.8(3.9) 262 amps 3/7920 (3595)
6000(2720) 10.1(3.1) 335 amps 4/7400(3359)
8000(3630) 8.8(2.7) 425 amps 5/6940(3150)
9500(4310) 7.6(2.3) 480 amps

 
Above performance specs are based on first layer of drum


Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H.
(577mm L. x 160mm D. x 196 mm H)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)









Inicio arrow WARN arrow Winches arrow Premium Series arrow XP 9500 Winch 12V 125´ Roller

Monroy
Monroy Parts
Teléfono: (33) 3122-2398 Fax: (33) 3122-2349 © 2007 Monroy Parts