Monroy

Monroy

 
Productos
Scroller
Bikini® Tops
Bikini® Tops


M15000 Winch 12V 90´ Roller
M15000 Winch 12V 90´ Roller


16.6 Ti Winch 12V 90´ Roller
16.6 Ti Winch 12V 90´ Roller


TABOR 12K, 12V, 100´ Roller
TABOR 12K, 12V, 100´ Roller


M12000 Winch 12V 125´ Roller
M12000 Winch 12V 125´ Roller


Supertop
Supertop


M8274-50 Winch 12V 150´ Roller
M8274-50 Winch 12V 150´ Roller


XP 9500 Winch 12V 125´ Roller
XP 9500 Winch 12V 125´ Roller


TABOR 9K, 12 V, 100´ Roller
TABOR 9K, 12 V, 100´ Roller


M8000 Winch 12V 80´ Hawse
M8000 Winch 12V 80´ Hawse
 
PDF
WARN arrow Winches arrow Premium Series arrow M8000 Winch 12V 80´ Hawse



M8000 Winch 12V 80´ Hawse




Winch Warn
M8000 SELF-RECOVERY WINCH
Compact. Tough. An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with either 80' of wire rope and hawse fairlead or 100' of wire rope and roller fairlead. Pulls a fast 8 ft. per minute at rated load.
M8000 SPECS/PART NUMBERS
Part Number: PN 20910 CE (12V DC) 80' wire rope and hawse fairlead
Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead
Part Number: PN 265032 CE (24V DC) 100' wire rope, roller fairlead, safety hook and thimble
Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 216:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16" diam. (30m, 8mm diam.)
Fairlead for PN 20910: Hawse
Fairlead for PN 26502, 265022, 265032: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
Nuts/Bolts: PN 39625

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)		 Line Speed
FT./min(M/min.)		 Motor
Current		 Pull by layer
layer/Lbs(Kgs.)
0 42(12.8) 80 amps 1/8000(3629)
2000(910) 16(4.88) 200 amps 2/7280(3302)
4000(1810) 11.9(3.63) 285 amps 3/6670(3026)
6000(2720) 9.79(2.98) 350 amps 4/6230(2826)
8000(3630) 8.01(2.44) 435 amps

24V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)		 Line Speed
FT./min(M/min.)		 Motor
Current		 Pull by layer
layer/Lbs(Kgs.)
0 27.3(8.32) 46 amps 1/8000(3629)
2000(910) 17.1(5.21) 99 amps 2/7460(3384)
4000(1810) 12.6(3.84) 145 amps 3/3980(3166)
6000(2720) 10.3(3.14) 190 amps 4/6620(3003)
8000(3630) 8.8(2.68) 235 amps
 
Above performance specs are based on first layer of drum

Warn

Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H.
(534mm L. x 160m D. x 193mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)








Inicio arrow WARN arrow Winches arrow Premium Series arrow M8000 Winch 12V 80´ Hawse

Monroy
Monroy Parts
Teléfono: (33) 3122-2398 Fax: (33) 3122-2349 © 2007 Monroy Parts